Mold Removal and Mold Inspection

Mold Specialist Newport Beach

Mold Specialist at your door!

Mold Specialist in Newport Beach CA - Air Quality test today.

Mold Testing and Mold Removal is a professional mold inspection, mold detection, and mold testing company. 1# Rank Mold Specialist company in Newport Beach and the best choice if you are looking for an unbiased home mold inspection or commercial mold inspection from an experienced Business

Moreno Valley Mold Testing Services Our goal is to make sure there is not indoor mold growth at your property, our service tells you what type of mold, and the airborne mold spore concentration (we will tell you the quality of air you have indoor) our services:

Air o Cell samples to check the mold spores levels inside.

Bio tape Direct Sample.

Mold Inspection to determine the damage at the property.

Limited or Full inspection mold inspection of your home, rental property, or business that will identify sources and instances of moisture intrusion and to detect mold, Our conclusions, mold results, recommendations are easy to understand and read. We use the best moisture detection Hygrometer, Thermal Camera, and Zefon BioPumps and Zefon Air-O-Cells (for airborne mold spore samples) we offer our basic package is 2 indoor samples and 1 outdoor. you get a full fungal report and the mold results.

we also offer Remediation reports and clearance reports after the property had a mold remediation treatment to prevent the mold from coming back.

Protocols and Post Testing Services

f the mold inspection and mold testing of your property finds high mold spores levels inside the house, we can provide you with the Mold Remediation Protocol and Xactimate estimate if you need it for your home insurance company, will all the instructions for a Mold remediation Company to follow when doing the Mold Remediation. Once the mold has been completely and properly remediated, once the work is done we can also provide ou with a mold inspection, post remediation inspection to make sure the levels of mold spores are back to normal inside the property.

Health Problems

High mold spores levels indoor might be responsible for your Health problems.

Symptoms of Mold Exposure

The most common symptoms of mold exposure include: Coughing. Postnasal drip. Sneezing. Dry, scaly skin. Itchy eyes, nose, or throat. Nasal congestion.

How do you tell if mold is making you sick?

Symptoms of mold exposure may include headache, sore throat, runny nose, coughing, sneezing, watery eyes and fatigue. In those with asthma, asthma attacks can occur. In those with impaired immune systems, serious infection can occur.

How long does it take to get sick from mold exposure?

These symptoms usually first appear 2 to 9 hours after exposure and last for 1 to 3 days. Other affected persons have progressive shortness of breath and cough, as well as weight loss. Work-relatedness may only become apparent over long holidays if symptoms resolve and then recur on return to work.

How can I test myself for mold exposure?

Urine testing for mold is one of the most popular ways to test for mold exposure, as elevated levels of uric acid and other organic acids may indicate exposure to mycotoxins. These tests should be performed in a sterile lab testing facility and the results analyzed by a trusted medical lab.

How do I find hidden mold in my house?

To find hidden mold, look for evidence of water intrusion which is often a sure sign that you either have mold in the home now or will be growing it soon. While it can be difficult to detect mold in the walls, it's important to look for these signs of mold growth, to identify the problem as quickly as possible

Roof Leaks and Mold

A leak from the rain can cause mold damages if there was water intrusion to the ceiling.

Some plumbing issues can be hard to find. These types of water leaks, no matter how small, can lead to serious water intrusion and mold.

Water intrusion in the Foundation of the house, leaving the water with not way out. Poor ventilation of the crawlspace, cracks in the foundation, support beams contacting the soil, and rising dampness can damage the foundation and lead to mold growth.

You can book an appoint today, its super easy to do, we might be able to schedule you for same day service is you need it. We are always here to help you improve the quality of your house and the safety of your family. We been in business since 2009. Our company name is 24/7 Water damage restoration. we take great care of our clients.

How much does a mold inspection cost ?Mold Testing Costs

On average, homeowners pay about $641 for a professional mold inspection. Depending on your location and the size of your house, that range can go from $297 and $994. it all comes down to the numbers of samples you need and the mold report that is needed it for the project, we offer mold clearance report and mold inspection reports with mold remediation guidelines and protocols by the IICRC S520

How do mold experts get rid of mold?

Mold professionals use expensive, professional equipment such as HEPA (High Efficiency Particulate Air) air scrubbers, HEPA vacuums, commercial-strength dehumidifiers, etc. Regular handymen won't have that stuff. Some mold remediation companies also do restoration work, just like a general contractor.

Additional Information about Mold Inspections in Newport Beach

mold inspection services at your door when you need a mold specialist.

Mold has the ability to cause significant damage to your residence and commercial business. It can grow on wood products, ceilings, wallpaper, carpet and drywall.

Mold growth can be exacerbated by water and fire damage. We provide Costa Mesa, CA mold inspection servicesincluding a detailed visual inspection and use a variety of sophisticated tools to help sample the extent of mold contamination. We also provide testing for microbial particles, moisture intrusion and air/bulk sampling. We can provide you with a detailed written report at the end of the project.

Our network of independent, environmental consultants have provided mold testing and mold inspection for thousands of residential, governmental, educational, and commercial clients who agree that Mold Testing and our network, is a group that you can count on. Mold Testing Specialist network provides mold testing and mold inspection services to Newport Beach, California, as well as many other states across the country.

Mold Protocol Development When mold issues are identified in a property whether it's a residence or building, the most important aspect of the assessment is to identify the cause why mold is present.

Why a mold remediation company should always build a negative air containment?

A few thing that a professional company should do. Mold professionals seal off the work area, building a negative air pressure containment. After mold is removed from its source, the air should be cleaned of airborne mold spores using HEPA air scrubbers and air exchange. We highly recommend to follow up with a low volume fogging service with antimicrobial. When vacuuming and using air scrubbers for mold remediation, the filters used should be HEPA (High Efficiency Particulate Air). Only HEPA filters are designed to capture

Read our blog for news and updates. Our environmental property inspections company in California serves: Newport Beach, Orange County, Los Angeles, San Bernardino, Riverside, CA. Environmental testing and consulting is our specialty, contact us today at (657) 345-2677 ▼ Original text Contribute a better

Environmental Testing can help you to know the mold spores levels and types of mold spores inside your property. We serve Newport Beach and Orange County.

Serving Newport Beach and Orange County.

Buying or Selling a property?

Are you buying or selling a house? schedule your appointment today and we will send a Mold Specialist certified mold inspectors to your door

Call Us

WHAT TO EXPECT FROM A PROFESSIONAL Air quality test company.

Mold Specialist - Mold Inspections in Newport Beach and Orange County.

Mold professionals seal off the work area, building a negative air pressure containment.

After mold is removed from its source, the air should be cleaned of airborne mold spores using HEPA air scrubbers and air exchange. We highly recommend to follow up with a low volume fogging service with antimicrobial.

When vacuuming and using air scrubbers for mold remediation, the filters used should be HEPA (High Efficiency Particulate Air). Only HEPA filters are designed to capture particles as small as mold spores. Regular filters will not work and could make the problem worse. Make sure the equipment they are bringing to your property is clean and in good condition, filters should look clean.

Mold professionals usually discard moldy, porous building materials such as drywall, insulation, and baseboards. These materials are relatively inexpensive to replace and difficult to impossible to restore to their previous uncontaminated condition. All the removed material should be based and seal inside the containment area.
Antimicrobial chemicals will be used to clean any remaining mold and mold stains after demolition

After a material is clean they should be seal with a mold primer paint to cover the material from any mold coming back.

Inspection Newport Beach, CA Looking for certified a mold testing and inspection company near Newport Beach, CA? Book Today.

Residential mold testing (single family dwellings and multi-family apartments) for pre-purchase and pre-sale documentation. Commercial mold testing for protecting tenant health and avoiding damage repairs. Post-remediation clearance laboratory testing to assure that mold removal efforts were thorough CONTACT US-

Certified mold inspectors. We perform all our services following the National Association of Remediators' and Inspectors' Standards of Practice and Code of Ethics. When you call we'll be happy to discuss what type of inspection best suits your particular needs.

What happens after the mold inspection?

We will provide you with a detailed report which includes a scope of work so you as the client know exactly what to expect for a successful mold remediation/removal to avoid and prevent health issues (such as otherwise unexplained eye and upper respiratory irritations, chronic coughing, active mold allergies).

How to avoid Growth?

Moisture problems will always lead to spores grows, that is why we recommend to fix leaks right away to avoid bigger Moisture problems and Water damages. Call our Home inspectors today. Click to call Mold Testing and Inspection Newport Beach

The consultant will perform a visual inspection, conduct air quality sampling with laboratory analysis, temperature and humidity readings, moisture assessment and respirable particle sampling.

mold Inspections Newport Beach - (657) 345-2677

Mold Testing - Air quality test

We offer Mold Testing Services, we used Air o Cell samples or Bio tapes to collect the mold spores or mold types.

Air samples can be taken and analyzed in a variety of ways. The most common method uses a "spore trap" and is called a "spore trap sample." Spore traps work by having a known volume of air pass impact a sticky surface as it passes through the spore trap sampling device. #1 mold testing newport beach #1 mold specialist

Where Does Mold And Mildew Grow?

During our expert mold assessment, we will certainly recognize not only where ALL the mold is hiding, but additionally the prospective reasons and also resources of the mold in and around your structure. This is important so that, as soon as mold and mildew elimination is finished, we can efficiently minimize the probability of re-growth.

It is essential to address the causes of mold, because anywhere there is a cozy, wet atmosphere, mold can (and will certainly) grow. Here are a few of one of the most usual locations we discover it in Los Angeles …

Here are some of the much more usual locations you will certainly discover it:

Water leaks around the roofing system, home windows, pipes, etc.
Central HEATING AND COOLING systems (it frequently expands in filthy air ducts, air filters, etc.).
Air flow/ cooling down systems (swamp colders, home window devices, split systems).
Washroom floors & wall surfaces.
Basement floors & wall surfaces.
Anywhere flooding or standing water happens.
Anywhere you have had previous water damages.

We are specialists in toxic black mold and mildew!

The bright side is that the price for black mold and mildew removal is not always much pricier in and of itself. As always, we will give you with a clear, exact and understandable estimate before performing any kind of services.

(657) 345-2677

Newport Beach CA

mold testing

mold removal

mold inspection

Mold Report - Air quality test

We also offer a Full inspection indoors of the property where we check all the bathrooms, sinks, AC unit, Water heater, toilets, dishwasher. On the Full inspection you will receive an Additional Inspection Report where we point out all the observations about the conditions of the property. This repost is used for buying or selling the property and also for Home insurances claims.

mold removal

mold testing newport beach

mold remediation

Mold Inspections -Mold Removal

At Mold Testing & Mold Removal We offer Mold Remediation services and Dry out services. We have all the equipment from Air scrubbers, Dehumidifiers, Air Movers and more. My name is Henry Gutierrez I'm the business Owner, we been in business since 2009

Fogging Services.

Fogging refers to the method of using an antimicrobial pesticide in an aerosolized form in order to kill mold present in a property.

If you want to make sure that the Mold Spores Level are low inside your property we can always do some fogging and help you keep the mold spores low.

5 TYPES OF HARMFUL MOLD

1. Stachybotrys

Commonly referred to as “black mold,” stachybotrys is one of the most dangerous types of mold and can cause flu-like symptoms, diarrhea, headaches, memory loss and severe respiratory damage. Because their lungs are still developing, children are at an even greater risk for health problems associated with exposure to black mold.

mold testing yorba linda

mold removal

mold remediation

As its nickname suggests, black mold is dark in color, although it can also be grey or dark green. It typically has a very musty or mildewy odor and is found in very damp areas of homes and other buildings.

2. Chaetomium

Chaetomium is most commonly found in homes that have water damage, as it thrives in wet, dark environments such as drywall, wallpaper, baseboards and carpets. This type of mold is similar to black mold and sometimes even shares the same environments.

Along with general signs of allergies such as red, watery eyes and trouble breathing, chaetomium spores can also cause neurological damage and certain autoimmune diseases.

3. Aspergillus

Although aspergillus spores are present in the air that many of us breathe every day, this type of mold can be dangerous to people with comprised immune systems. Exposure to aspergillus may cause allergic reactions, lung infections and a specific type of infection known as aspergillosis.

4. Penicillium

Like aspergillus, penicillium is abundant in many everyday environments, but if trapped inside your home, it can cause asthmatic symptoms, bronchitis and other respiratory problems.

5. Fusarium

Fusarium is a type of mold that is most commonly found in plant debris and soil, although it can also be found in very damp areas of your home such as underneath carpeting, inside drywall or foam insulation and in humidifier pans and HVAC systems.

Although quite rare, a serious eye infection called fusarium keratitis can result from exposure to fusarium spores.

Newport Beach CA

credits to

bioterra.

(909) 655-5083